TemporaSync
NTP Stratum 1 de LAN disciplinado por GNSS: tiempo contrastable para hospitales, armarios industriales, seguridad y redes de planta. Encaje la aplicación y luego elija el modelo.
Empiece por un escenario o un modelo
Productos
Tres niveles: SY-1231 NTP de armario (BeiDou+GPS · TCXO · Up to 3840 · Accuracy ±1–5 ms) → SY-4096 1U de medio ancho con sello hardware+OCXO+salidas de tiempo (Up to 21000 · sostenido 20000–21000 · Accuracy ≤ 100 µs) → SY-8640 multipuerto / doble alimentación (hoja de ruta). Primero el escenario.
Modelo de pedido típico: SY-1231-BG-T-S
NTP Stratum 1 de LAN GNSS para armario. Disciplina BeiDou+GPS, reserva TCXO, un puerto 10/100M, más Modbus / 1PPS TTL / PULSE de minuto. Sin IRIG, sin OCXO, sin doble puerto ni doble alimentación. Up to 3840 NTP requests per second; Accuracy ±1–5 ms.
Adecuado para Hospital weak-current, industrial cabinets, security NVR, office/metrology; single LAN port. Planning N=⌊η×R/f_poll⌋.
Más información
Modelo de pedido típico: SY-4096-GN-O-S
Half-width 1U · single-port Web ops. Hardware-stamped NTP, OCXO, 1PPS / IRIG-B DCLS / programmable pulse / Modbus. NTP Support: Up to 21,000 req/s (sustained 20,000–21,000); Accuracy ≤ 100 µs.
Adecuado para Factory, campus, and building-edge cabinets that need stamped NTP, OCXO, and hardware time I/O on one subnet.
Más información
Modelo de pedido típico: SY-8640-GN-O-S Hoja de ruta
Plant / multi-port path: separable mgmt/timing, multi-gigabit, optional dual supply. Planned direction only until the shipping datasheet—no standalone commitment figures.
Adecuado para Power/metals plants needing separated mgmt/timing or multi-port form (roadmap); bridge with SY-1231 / SY-4096.
Más informaciónPlanned flagship path. vs SY-4096: multi-port, dual supply, plant tenders. Do not tender against unpublished items.
Aplicaciones
Hospital, armario, seguridad e E/S auxiliar (1PPS · PULSE · Modbus) → SY-1231; sello de borde+OCXO+IRIG → SY-4096; planta multipuerto / doble alimentación → SY-8640. ★ marca los sectores prioritarios.
HIS, EMR, and security subnets need one LAN time base to keep logs aligned. SY-1231 delivers GNSS-disciplined NTP Stratum 1 with BeiDou+GPS and TCXO holdover on a single port sized for typical weak-current cabinets—datasheet capacity and protocol boundaries support clear acceptance.
Primary: SY-1231 (hospital)
Más informaciónProduction and automation cabinets need an inspectable on-prem time source for PLCs, IPCs, and logs. Single-port LAN NTP with one AC or DC inlet and front-panel LOCK checks; plan capacity from the datasheet formula.
Primary: SY-1231
Más informaciónCameras, NVRs, and access platforms need consistent timestamps for correlation and search. Cabinet GNSS NTP keeps the reference inside your control boundary and cuts drift—usually a single LAN port is enough without hardware-stamp or OCXO upgrades.
Primary: SY-1231
Más informaciónBeyond Ethernet NTP, sites often need TTL 1PPS, a minute PULSE, or RS-485 Modbus absolute time. Accept per channel—do not apply internal ns / 1PPS to NIC NTP. Shipping SY-1231 covers 1PPS + PULSE + Modbus (no IRIG); IRIG-B → SY-4096; multi-port / dual-supply → SY-8640.
Primary: SY-1231 (accept per channel)
Más informaciónFactory, campus, and BA edge cabinets: half-width 1U single-port with hardware-stamped NTP, OCXO holdover, and hardware time outputs (1PPS / IRIG-B / programmable pulse). SY-4096 fits this tier—does not replace the multi-port / dual-supply flagship.
Select SY-4096; bridge with SY-1231
Más informaciónPower, metals, and plant SIS often need separated management and timing ports, multi-gigabit links, and dual supply. SY-8640 targets that scene—do not tender unpublished items; bridge with SY-1231 or SY-4096.
Path: SY-8640; bridge with SY-1231 / SY-4096
Más informaciónQuality & commissioning
Specs are written per channel. Each shipping unit passes a factory gate. Commission on-site with the datasheet, Web exports, and client checklist. Contract acceptance is client measurement—not a factory PASS lamp.
Each SY-1231 is gated before ship: LOCK, LAN NTP, and 1PPS / PULSE / Modbus checked per channel. The Web UI shows a read-only factory record (PASS/FAIL); the ship ticket records SETID and firmware Build. Fixture thresholds stay internal; a PASS sheet without process detail can ship with the unit when required.
The datasheet and interface annex give per-channel steps: scope the 1PPS jack and Pin4 minute pulse, NTP via the client checklist, Modbus via the register map. The LCD is for patrol; accuracy and events go out as event_log.csv and quality_24h.csv. Hospital sites also have a 10-step bring-up note.
Support needs SETID, firmware Build, and event_log.csv / quality_24h.csv. The Sync Assistant is an optional field health-check (SNTP / client status)—not a metrology certificate, and it does not change host time by default. The config command library is licensed. The factory gate EXE is production-only and not a public download.
QA wording: include/exclude and accuracy layers follow the shipping datasheet. For support, send SETID + Build plus event/quality CSVs. Do not put internal second-edge figures into NIC acceptance.